My nieces love hair bows and pony tail holders. They also lose them faster than we can find them. If you have kids in you life like that, this tutorial is for you. It is a perfect stocking stuffer and they will think it is super fun. I can not wait to see my youngest niece open her gift and see this super awesome Lollipop.
Thin cardboard 2 3″ circles
Popsicle stick or chop stick
Pony Tail holders minimum 25
Ribbon or barrette
Decorative paper or glitter (If you want to decorate the cardboard circles.) Continue reading →
One of my Favorite flavors of the Holiday Season is Peppermint. Peppermint in Coffee, Cookies, Candy canes, it’s everywhere.
Check out the YouTube video below.
My favorite Peppermint treat is Peppermint Bark. You can make it so many ways with so many different combinations of ingredients. This is my recipe using Almond bark instead of chocolate chips. I like almond bark because of the smooth consistency and ease of melting. You can use your favorite chocolate if you want. If the Almond bark or Chocolate are not smooth when melting add 1 tsp of vegetable oil to smooth it out.
This is one of my favorite Holiday Goodies. There is not much better than a warm cup of cocoa or coffee on a cold winter evening. Unless you have one of these yummy chocolate dipped Peppermint sticks to stir your drink. The spoons are a fantastic start to a cocoa bar for a party or as an addition to a teachers gift.
The fun of this DIY is that you can use any Chocolate you want. You can use any topping or no topping at all. I tried to cover a few options for you in this recipe. You can dip spoons, peppermint sticks, candy canes or use small cups and Popsicle sticks.
Make sure to cover the work area with parchment paper. The parchment keeps the chocolate from sticking to anything other than the spoon etc. Continue reading →
Part 2 of the journal series is the Homemade journal. My nieces are going to love these monogrammed Journals. It takes a little lime to complete the journals but the time is well worth the final outcome. The design is super simple and the process is easy to complete. The Kiddo even helped on this one.
16.5″ x 10″ piece of vinyl fabric (leather or fabric with heavy interfacing works great.)
20″ piece of ribbon for closure (you will cut the ribbon to size once finished)
1 buckle (you can omit the buckle if using vinyl or leather)
Paper – I used a 12″ x 9″ sketch paper.
basic sewing supplies, you can use a machine or hand sew.
Step 1 – Paper prep
I used a sketch book for my paper because it is a more heavy weight and has a better feel. The down side is having to tear each peace from the pad. tearing 3 at a time worked 5 not so much.
Organize into groups of 10 sheets.
Fold each 10 sheet group in half. This makes a booklet of 20 pages. 9″ x 6″
I made 60 sheet journals by clipping 3 folded sets together. The clips keep the pages together and the crease well defined. If you make a few journals at a time grouping the page sets together makes keeping the projects organized easier.
Measure the width of the page set for an exact measure of the spine. I used a generic 1″ spine to allow for a pin and whatever else the girls may carry in the journal.
Step 2 – Placement and sewing
Use 1 of your page sets to decide on spine placement. I measured .5″ from the outer edges to the raw paper edges.
Using chalk I marked the spine edge and the corners to help with placement later.
I marked 1″ over from the spine edge to define the full spine space.
Test the spine and closure fold. Decide if you want the flap on the right or left of the journal. I decided on the left.
For an added detail you can add a curve to the corners. Use a curved object and mark the curve then cut carefully.
Step 3 – stitch pages
You can work from right to left or left to right of the spine.
I lined my paper fold up to the right spine chalk mark. Open the set keeping the center line on the chalk line.
I used painters tape on both sides of the paper to keep it in place.
There are 2 ways to stitch the paper in place.
1. Set your machine to the longest straight stitch and carefully stitch the sheets in place. Remember to back stitch.
Tip: a zipper foot works really well to keep the lines straight, especially when adding the next few sets of paper.
2. Hand stitch the paper in place. This is a little harder because you may need to use a hammer and a nail to preset the stitching holes. Use an extra large needle or leather needle to stitch the paper in place. Make sure the stitches are equal distance apart and you may want to stitch over a few times to make sure the paper is secure. Hand stitching looks beautiful on the outer spine.
Hand stitching is around 2 or 3 inches apart while machine stitching is much closer together.
Line up the next bundle and tape in place. If using a zipper foot the page lines up quite well. Continue with the same stitching process.
Step 4 – closure
There are 2 closure options for a buckle style. Use a button buckle or cut 2 parallel 1″ slits in the cover for the ribbon to go through.
I choose 2″ in from the edge of the inner cover and the center point.
You can machine stitch or hand sew the buckle in place. I tried it both ways and it worked either way. Be careful when stitching with your machine (close zig zag stitch). If the needle hits the buckle the needle will break.
To attach the closure ribbon or cording fold under the raw edge and stitch it in place. Make sure you line it up with the buckle and pin in place.
To close the Journal
Slide the ribbon through the buckle and wrap it around the journal. Slide the ribbon back through the buckle for extra security. Trim the ribbon to fit.
I embroidered an initial but you can leave it solid and it is elegant and beautiful. You could sew on a patch, buttons or decoration. You can also cover the inside cover by gluing in an end paper. I have not tested out glues because I decided to leave the inside as is. You could also stitch in end papers jut make sure the stitches are even and straight because they show on the outside.
I like to gift box my soaps for the holiday season and I thought I would share one of my Homemade Gift Box Tutorial’s with you for the holidays. You can change up the measurements to fit your gift these measurements fit my soap perfectly. Watch the YouTube video below or follow the written tutorial to make your own boxes.
8.5 x 11 card stock
template (if you have one)
Trace out the box using a template or measurements.
Side 1 – Score 3″, 6″, 9″
Side 2 – Score 1.5″, 2.5″, 6″, 7″, 8.5″
Use a ruler to have straight edges.
Score the lines and the points for the hole punch. I use a finger nail polish Dot tool and a ruler to score my lines.
Cut out the box along the outer lines.
Punch the holes in the edges along the punch marks.
Lay out the gift wrapping paper. Use a template or cut out a 9″ x 3.5 rectangle.
Fold along the scored lines
Line up the center edges with the wrapping paper edges.
Glue the paper in place. (the gluing photos turned out blurry.)
Punch the holes in the wrapping paper along the hole punches in the card stock.
Center the gift or soap in the box.
Close the center flaps.
Wrap the ribbon around the center of the box.
Thread the ribbon through the bottom punches.
Thread the ribbon through the top punches.
Tie the bow.
The box is now ready to gift.
You may also like:
Do you have a favorite hand make box or gift wrapping idea? What is your favorite gift wrapping story?
The absolute best Chocolate Pie Recipe Ever. I make this pie every year for the Holidays Thanksgiving through New Years and I get requests for this pie starting in October. There are quite a few variations all you need to do is add your favorite chocolate, peanut butter, Heath bar etc. 1/4 to 1/2 a cup. Continue reading →
I always enjoy the little things that make childhood magical. My niece just lost her first tooth and I immediately asked if she had a Tooth Fairy Pillow. She did not, so of course I had to make one for her and then I made a few more for the Etsy Shop as well. I also like the how it’s made shows so I thought it would be fun to show you guys how I make the Tooth Fairy Pillows and write a Tooth Fairy Pillow Tutorial all at the same time. I hope you like it. Continue reading →